**********************************************************************************

The electrica cutout valve control the opening.

The state has to open/clearance,the warranty is about 6Month.

Imcompatible Method Half open and half Clearance.

Once always keep half open or half clearance.

The warranty is shorter and just about 200-500times,may more less times.

Attention:

Once remote control is not our. The Cutout valve will be easy broken.

That will be no support any Guarantee ,Claim,Repair.

**********************************************************************************

You are buying on 100% Brand New of:

EPMAN 2"/2.25"/2.5"/2.75"/3"/3.5" Electric Cutout/E-Cut Out Valve System W/O Remote for Exhaust Catback/Downpipe EP-CUTYXMM

Available Inlet/ Major Piping Diameters: 2"/51mm,2.25"/57mm,2.5"/63mm,2.75"/70mm,3"/76mm,3.5"/89mm (can be weld to Corresponding exhaust cutout size)

*Part No. : EP-CUTYXMM20    Size: 2"/51mm(can be weld to 2.0" exhaust cutout )
*Part No. : EP-CUTYXMM225   Size: 2.25"/57mm(can be weld to 2.25"exhaust cutout)
*Part No. : EP-CUTYXMM25   Size: 2.5"/63mm(can be weld to 2.5"exhaust cutout)
*Part No. : EP-CUTYXMM275   Size: 2.75"/70mm(can be weld to 2.75"exhaust cutout)
*Part No. : EP-CUTYXMM30   Size: 3"/76mm(can be weld to 3.0"exhaust cutout)

*Part No. : EP-CUTYXMM35 Size: 3.5"/89mm(can be weld to 3.5"exhaust cutout)

Product Fit (Make/Model)

Universal Application Fits Most Vehicles with 2" Or 2.25" Or 2.5" Or 2.75" Or 3" or 3.5" Piping Diameter Exhaust System

Remark: Fits Piping with 2" Or 2.25" Or 2.5" Or 2.75" Or 3" Or 3.5" Outside Diameter ONLY;
Dual Exhaust System require 2 Sets of this Kit for Complete Installation

For Year and Model, Please Check Compatibility

Item Description & Specification

This Electric Exhaust Cutout System is specifically designed and made to enhance the performance, sound, and power of vehicles with the flip of the toggle switch. Instantly increases up to 20+ Horsepower. Designed to be conveniently welded onto anywhere from the cutout location from the header to the catback of vehicles. Electrical appliance allows opening the cutout simply by flipping the switch and exhaust will be opened for a more direct exhaust flow, more power and desired loud rumble of the exhaust.

Surface Finish: Stainless Steel Finish

Material:

Pipings - High Quality T-304 Stainless Steel and Computerized Mandrel-Bends for Strength and Robustness

Electric Cutout Kit - Made of Lightweight CNC Machined Anodized T-6061 Aircraft Aluminum Alloy

High Performance Specification Design

Dyno Proven to Increase 10 -20 Horsepower Instantly

Smooth Exhaust Gas Flow While Providing a Aggressive Full-Bodied Sound

Simple Flip Switch Allows Controlled Exhaust Valve Outflow. easy to Control the Exhaust Volume and Air Flow

Special High Torque Electrical Gear Motor Specifically Manufactured to Withstand High Temperature and Vibration

TIG Welded CNC Machine Flange for Opposing High Pressure and Deterioration

Increase Engine Output and Efficiency, as well as Maximizing High Exhaust Air Flow Rate

Professional Installation is Highly Recommended (No Instruction Included)

Product Content:

1 X Electric Exhaust Cut Out Kit with Gear Driven Motor

1 X Stainless Steel Y-pipe

1 X 45-Degree Stainless Steel Elbow Dump Pipe

1 X Toggle Switch

1 X 12ft Wiring Harness

1 X Stainless Steel Flange Adaptor

1 X Aluminum V-Band Clamp

2 X Flange Gaskets

1 X Set of Bolts with Lock Washers and Nuts

Hardware as Shown in the Picture Above

All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.