EPMAN Aluminum Intake Manifold Conversion Nipple Kit K20 Intake Manifold Adapter on K24 Coolant For Honda For Acura EPCAP2024

You are buying on 100% Brand New of:

EPMAN Aluminum Intake Manifold Conversion Nipple Kit K20 Intake Manifold Adapter on K24 Coolant For Honda For Acura EPCAP2024

Application:
All K24 Engines
Engine: K24A2 K24Z3 K24Z7
For All K24 Engines
For Honda Civic Si
For Acura TSX / ILX

Note: For use with K20 Manifolds on K24s
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle to match your needs

Specification:
100% quality assurance tested, more responsive, less expensive, easier to install.
Simple and easy way to install.
We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads.
The adapter lowers intake air temps.The adapter also features a 1/8 NPT port

Material: High quality aluminum.
Color: As Picture. 

Package Included:
1 x Coolant Adapter.

Quick Instructions:
Required Tools
Drill
1/4 or 6.5mm drill bit
13/64 or 5mm drill bit
M6x1.0 tap (Standard and bottoming)

Reference Feature:
1.The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads.
2.The recirculation fitting on K24s is typically part of the intake manifold which isn't on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads.
3. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen for Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter.
4. The adapter lowers intake air temps as coolant is no longer connected the intake manifold.
5.The adapter also features a 1/8 NPT port for a coolant temp sensor commonly used in swap cars.
6.The Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head.
7.The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal.
8.The other option is using the provided blind hole you can easily tap the head for the second hole.
9.Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap.

All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions.

We take no responsibility in teaching you how to install. Professional installation is strongly recommended.