EPMAN 10 Meter Heat Shield Sleeve Insulated Wire Hose Cover Wrap Loom Tube ID 10mm 12mm 15mm 20mm

EPMAN 10 Meter Heat Shield Sleeve Insulated Wire Hose Cover Wrap Loom Tube  ID 10mm 12mm 15mm 20mm

Cool down with Epman Racing Cool Sleeves.
Available in multiple lengths and diameters to fit: wiring, fuel lines, brake lines, intake tubes, intercooler pipes, spark plug wires, battery cables, A/C hoses, radiator hoses and more.
1st Quality Fiberglass, Silicone Bonded to an Aluminum Alloy outer skin
Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards
Pliable enough to be shaped to fit the tightest bends.
Better than heavy silicone tape, sleeves are lightweight, easy to install and easy to remove

Rated for Extreme Heat:
Reflects over 90 % of Radiant Heat
Continuous exposure to 1100 degrees
Intermittent exposure to 2000 degrees
Direct contact to surfaces up to 500 degrees
Fireproof, Oil Resistant, Light Weight

SIZE:

Easy to trim. Slides right over wires, cables and hoses.
For best results seal the sleeves at each end with adhesive foil tape, shrink tube or stainless steel cable ties.
​​​​​​​Sleeves are conductive always insulate electric terminals that it might come in contact with sleeves.
To ensure a proper fit, allow extra room for bends (for example: a 90º bend in a 3/4" tube will NOT fit in 3/4" I.D. Sleeve, In this case you would need 1" I.D. or bigger)